All posts by Erik

Disposable floors?!

Your hardwood floors should not be disposable!

We here at Evergreen Hardwood Floors are focused on a quality first approach. For the work that we do and the flooring we install. Unfortunately we are noticing an unfortunate trend around our area. Still perfectly good hardwood floors are being ripped out, then installing lesser quality hardwood flooring or even laminate.

There seems to be a lot of misinformation out there regarding the life expectancy of hardwood floors. Good quality hardwood floors should last as long as your home is standing.

The waste and environmental impact is enormous from this practice. The still useful flooring is just thrown into the landfill, where it sits and adds to the pile of garbage. Some of the new flooring installed, it may be hard to tell where your hardwood floors come from, without a lot of research.  Some overseas manufacturers have much lower environmental standards and sustainable logging practices are not a concern.
While this may help lower the price, this has a major impact on the worldwide environment but also the environment of your own home. We know you are concerned about the environment now and for future generations, so why not extend that to what goes in your own home!

Loba Impact Oils – 0% VOC

So what do you do if you have hardwood floors that are worn or out of date? We offer the option of refinishing your hardwood floors. With this practice, the environmental impact is much less. We remove as little as possible of your existing hardwood floors and then we build it up through the use of low VOC stain and finish coats. We are committed to always offering you the best options for your health that also have great durability and longevity for your hardwood floors.

The bonus of the refinishing process is that you can have a direct impact on how your flooring looks. The choices that you can make for regarding the colour of your floor are almost endless so we can really tap into what you want your home to look like!
So if your hardwood floors are looking out of date, within a few days we can get them looking modern again, and you can have a hand in the finished product.

Stain samples

Also, if you need to install new hardwood floors we can help you choose the best option for your home. We do our best to offer flooring from mills that are conscious of their environmental impact. Whether that’s an engineered or solid hardwood floor, we want you to love your floors for decades! We would not want you to go through all the inconvenience that come with a renovation, and then have to go through it again with ripping up your floors every few years. I know that may seem far off, but the years seem to fly by.

Contact us today, about your hardwood flooring project, and you may be surprised by the options available to you.

Moisture & your hardwood floors

Crowns are for your head, not your floors.

Recently I refinished a hardwood floor that previously had moisture issues that were not corrected properly, and it got me thinking about this subject.

The floor in question was crowned, where the center of every board bulges up.

hardwood floors

When the house was first built there was a moisture issue of some kind.  The floor then cupped, because the boards would swell from the intake of moisture, and then edges push against each other.  So the builder fixed the moisture issue and got the floor refinished, soon after.

Where I believe the issue happened was that the floor was refinished too soon.  The floor didn’t have time to stabilize the moisture content and lay back down.  So when they sanded it, it looked flat, but when the moisture stabilized later, the process of sanding had taken too much wood off the edges, so now the centers of the hardwood floor had more material and was crowned.

If they had left it longer and let the wood stabilize more, then refinished it, it would have been a flat floor.

This is not the only way your hardwood floor can get crowned.  If there is a difference in moisture within the board, this can happen as well.

Since this moisture issue was well in the past and the it had been stable for a long time, with our refinishing we were able to get the floor nice and flat.

Before&After maple hardwood floor

This was not the only reason the homeowner decided to get their floors refinished, as it was worn and due for an update.  We were  able to get a nice bright custom stain colour that opened up the space and that homeowners were very happy with.

The proper steps must be followed so the issues can be corrected once and for all.  This starts even before install, with proper moisture readings of the space and of the wood.  Allowing the floor to acclimate to the new environment is key.  Proper moisture control during and after install is very important as well.

So this was a good reminder that care needs to be taken with all aspects of a hardwood floor install and refinish.  From proper acclimatization,  and knowing the full history of the floor.

If you want anymore info on our services, contact Evergreen Hardwood Floors today.

Tools of the hardwood flooring professional

Tools of the hardwood flooring trade

I wanted to provide a little insight into my trade after going to see a client who tried to refinish his own floors with some rented equipment.  Some things are fairly DIY safe but some are a little more complicated.  I liken it to car maintenance.  I have no formal training, but I do have wrenches, screwdrivers, and Youtube, so I can do oil changes and basic maintenance but should I take apart my transmission? That is a recipe for disaster, trust me.

Our friend finally gave up after about 2 1/2 days on his living room, and still not getting the results he wanted.  As a professional with the proper equipment, in that timeframe I would have already been finished that clients hardwood, and he would have his house back in order.

So just how does a professional belt sander help?  I’ll explain.

First, what do I use? I have a professional hardwood flooring sander that is called the Bona Belt or Big Momma as I like to call it. 

Hardwood floor refinishing
Refinishing an oak hardwood floor with a professional sander

It’s from Sweden and runs like a top.  It removes that old finish with ease and gets your floors nice and flat.  There are many different types of professional belt sander, they all look fairly similar, and one that is properly tuned up will do a great job.  I do proper maintenance, replace parts when needed and keep it free and clean of built up dust.

The rental machines are usually in pretty rough shape.  Kinda like a rental car or your own personal car.  Which one will you take better care of?

A sander that has been taken care of will run better and give you better performance, just like your car. This will affect how your hardwood floor will look.  A sander that has not been taken care of can leave an uneven floor which will not look good in any light, this is important.

Hardwood floor refinishing
You can see divots and stains left that this rental sander cannot get out.

The main difference between a pro and a rental is the power and weight. 

All pros should use 220V power, from your electric stove or dryer outlets.  That gives it the juice to power through all the tough coatings.  A rental sander uses 110V, which is from a normal outlet in your room.The other big difference is the weight.  The rental sander usually top out at 100 lbs, while my professional sander is around 200 lbs.  So that gives it the weight to  really bite into the floor and start removing those old coatings with ease and get your floor nice and flat.  This is important because if you don’t get it flat now it wont look as good when the finish goes on.

Hardwood floor refinishing
Another common type of rental floor sander, you can see the difference in size as compared to a professional sander.

Another big difference between pro equipment and rentals is the sandpaper. You may think that sandpaper is sandpaper, it all does the same thing.  I used to think the same way, but, some paper is better than others, especially for difficult floors.  A lot of new floors are coated with an aluminum oxide.  This can be difficult to remove with a smaller sander, with the wrong sandpaper.  You have to get very aggressive with it at the beginning.  But with a sandpaper that has been specifically designed to remove these finishes, it makes sure that the job will be a lot easier and faster.  Overall the floor will look better as well, because you didn’t have to get so aggressive with it, so there will be less scratches.

So those are the main differences in the types of sanding machines available.  One you can rent for yourself from a big box store, and use up your weekends working away.  Or you can hire one from us, Evergreen Hardwood Floors, that even comes with a hardwood flooring professional, with all the experience needed to do a quality job on your floor, and you can get your home back sooner.

Contact Evergreen Hardwood Floors if you would like to know more about our hardwood floor refinishing services.

Common questions : How should I clean my hardwood floors?

I get this question a lot, especially right after I have refinished someone’s hardwood floors. They want them to look new for as long as possible. So I thought I could make a list of some things to do and not do.

Cleaning hardwood floors
Hardwood floor cleaner

DO keep a walk off mat, at every outside entry. Make sure it is suitable for hardwood floors. This will catch any dirt or small rocks before they get on your hardwood floor.

DO vacuum or dry mop the hardwood floor regularly. This will remove any dirt or grit before it can damage your floor.

DO clean up any liquid or sticky messes quickly. You can use a damp cloth, or a hardwood floor specific cleaner for this.

DO use any cleaner that’s recommended by your hardwood floor finish manufacturer.  Some hardwood floor finish manufacturers have a specific cleaner they make or recommend.  Such as a hard wax oil, like Rubio Monocoat, has it’s own cleaner.  It’s best to use that.

DO NOT use a steam mop to clean your hardwood floors. These mops force moisture down into the wood, and over time this can break down the finish and the structure of the hardwood. Too much moisture and hardwood floors do not mix.

DO NOT mop your hardwood floor. Again this goes back to the point of too much moisture is a bad thing.

DO NOT use any “soap” or “rejuvenation” products. Most of these products are not compatible with modern polyurethane finishes. Also they can leave a film that attracts dirt and dust, which can build up over the floor, leaving a streaky mess on top of your hardwood floor.

These are a few things that I have found help keep a hardwood floor clean.  If you have any tips of your own, please share.

Thanks for reading.